JCB2LE-80M4P+A 4 Pole RCBO With Alarm 6kA Safety Switch Circuit Breaker
Introduction
The JCB2LE-80M RCBOs (residual current circuit breaker with overload protection) with Alarm are suitable for circuit monitoring, it is convenient for customer to check earth fault and make you more safety.
Provides protection against earth fault/leakage current and function of isolation.
High short-circuit current withstand capacity.
Fire resistant plastic parts endures abnormal heating and strong impact.
Automatically disconnect the circuit when earth fault/leakage current occurs and exceeds the rated sensitivity.
Independent of power supply and line voltage, and free from external interference, voltage fluctuation.
I∆n ≤ 30 mA: additional protection in the case of direct contact
I∆n ≤300 mA: preventative fire protection in the case of ground
AC Type – Tripping is ensured for sinusoidal, alternating currents, whether they be quickly applied or slowly increase.
A Type – Tripping is ensured for sinusoidal, alternating residual currents as well as for pulsed DC residual currents, whether they be quickly applied or slowly increase.
Product Description
Standard | IEC61009-1 , EN61009-1 | |
Electrical features |
Rated current In (A) | 6, 10, 16, 20, 25, 32, 40,50,63,80 |
Type | Eletronic | |
Type (wave form of the earth leakage sensed) | A or AC are available | |
Poles | 4 Pole | |
Rated voltage Ue(V) | 230/240 | |
Rated sensitivity I△n | 30mA,100mA | |
Insulation voltage Ui (V) | 500 | |
Rated frequency | 50/60Hz | |
Rated breaking capacity | 6kA | |
Rated impulse withstand voltage(1.2/50) Uimp (V) | 6000 | |
Pollution degree | 2 | |
Thermo-magnetic release characteristic | B, C | |
Mechanical features |
Electrical life | 2, 000 |
Mechanical life | 2, 000 | |
Contact position indicator | Yes | |
Protection degree | IP20 | |
Reference temperature for setting of thermal element(℃) | 30 | |
Ambient temperature (with daily average ≤35℃) | -5…+40 | |
Storage temperation (℃) | -25…+70 | |
Installation |
Terminal connection type | Cable/U-type busbar/Pin-type busbar |
Terminal size top/bottom for cable | 25mm2 / 18-4 AWG | |
Terminal size top/bottom for Busbar | 10mm2 / 18-8 AWG | |
Tightening torque | 2.5 N*m / 22 In-Ibs. | |
Mounting | On DIN rail EN 60715 (35mm) by means of fast clip device | |
Connection | From top or bottom are available |